WFM Tractor Talk
Restoration and Repair
Everything Else
Classifieds
Vendor Member Section
Want to Grow Your Business? Learn more about becoming a Supporting or Premium Vendor
Latest Posts
-
Hydrostatic Drive TractorsThis is inspired from GrandpaJay's modded 400, my work pales in comparison to his talent and skill level. I also used some ideas From LukeL. I finally started this after a couple years of collecting parts. I bought a few versions and settled on one from an LT series Deere. Parts from other...
- 2
- 60
-
Hydrostatic Drive TractorsAny hints on how to disassemble a 318 drive shaft? The technical manual implies that you can just slip the caps out of the housings but mine can't be pressed from one side to remove the cap on the other. The fit is super tight and the joint binds up before the other side is out of the yoke...
- 8
- 140
-
Hydrostatic Drive TractorsIs it normal on a 318 to have to pull the hydro lever in to engage the micro neutral switch? I've tried adjusting it, even put a couple washers to try and shim it. Bent the bracket a bit. I got it to where I think it would be best. But almost feels like the spring on the lever isn't pushing it...
- 8
- 73
-
Hydrostatic Drive TractorsI’m doing the same kind of thread I posted on GTT (but with the 50 series tractors) cause I love seeing y’all’s tractors! Today, we’re going with the bigger lawn n gardens. Here’s my (very early) 1987 430! She’s a two owner vehicle (good friends with the original owner who bought it new!) and...
- 283
- 20K
-
Hydrostatic Drive TractorsI put a new tire on my 318 and wheel bearings over the summer. I wasn't in a normal driveway situation. I was done with the driveway. I have been trying to make a sledding hill in my backyard for my daughter. This is first time really using it and was in very thick heavy snow. The clip must have...
- 9
- 1K