My 60 restification. - Page 2
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: My 60 restification.

  1. #11
    Senior Member
    Display Name: Jerry
    The dutchman's Avatar
    Join Date
    Nov 2018
    Location
    Holland, MI
    Posts
    189
    Thanks
    0
    Thanked 35 Times in 30 Posts
    Any idea if your I/C would take the same starter as the flathead I pulled from my 111? Stsrter is almost new and the plastic cover is decent. If it would work I'd make ya a good deal.

  2. Remove Advertisements
    WFMachines.com
    Advertisements
     

  3. #12
    Senior Member
    Display Name: Nate
    MiniHomesteader's Avatar
    Join Date
    Sep 2016
    Location
    Pennsylvania
    Posts
    1,671
    Thanks
    455
    Thanked 397 Times in 307 Posts
    Quote Originally Posted by The dutchman View Post
    Any idea if your I/C would take the same starter as the flathead I pulled from my 111? Stsrter is almost new and the plastic cover is decent. If it would work I'd make ya a good deal.
    That’s a good question. Is there any numbers on your engine? I can look to see if they would take the same starter.
    1985 111
    1967 112
    1966 110
    1966 60 w/ deck
    46 Mower Deck
    Modified 31 Tiller
    36 Snowblower
    42 Blade
    21 Power Drive

    Custom Mini Wagon

    Brinly CC-500
    Hinson No 1977&1978 Weather Shield

  4. #13
    Senior Member
    Display Name: Jerry
    The dutchman's Avatar
    Join Date
    Nov 2018
    Location
    Holland, MI
    Posts
    189
    Thanks
    0
    Thanked 35 Times in 30 Posts
    I'll look when I get home at some point today. It's the stock engine from the 111.

  5. #14
    Senior Member
    Display Name: Nate
    MiniHomesteader's Avatar
    Join Date
    Sep 2016
    Location
    Pennsylvania
    Posts
    1,671
    Thanks
    455
    Thanked 397 Times in 307 Posts
    Doing a quick general lookup, at least as far a Jacks Small Engines. They list Briggs starters by case length, pinion teeth, and voltage. I think the two engines use the same style mounting, so if you could measure that stuff, I’ll measure the starter on my other I/C.
    1985 111
    1967 112
    1966 110
    1966 60 w/ deck
    46 Mower Deck
    Modified 31 Tiller
    36 Snowblower
    42 Blade
    21 Power Drive

    Custom Mini Wagon

    Brinly CC-500
    Hinson No 1977&1978 Weather Shield

  6. #15
    Senior Member
    Display Name: Roger Henning

    Join Date
    Mar 2002
    Location
    Sharon WI
    Posts
    10,143
    Thanks
    1
    Thanked 577 Times in 484 Posts
    This is from about one page back and one year ago and posted on WFM. Roger
    https://www.wfmachines.com/forums/sh...-swap-(no-mods!)

  7. The Following User Says Thank You to woodpecker41 For This Useful Post:

    MiniHomesteader (10-12-2019)

  8. #16
    Senior Member
    Display Name: Nate
    MiniHomesteader's Avatar
    Join Date
    Sep 2016
    Location
    Pennsylvania
    Posts
    1,671
    Thanks
    455
    Thanked 397 Times in 307 Posts
    I’ve decided to move the clutch arm outward(1-5/8”) and offset the linkage. The brake arm only needed slightly bent out to clear the engine. I’ll need to trim 1” from the floor under the battery tray, and trim out the battery tray to clear the steering column after positioning the tray 1” farther back.
    1985 111
    1967 112
    1966 110
    1966 60 w/ deck
    46 Mower Deck
    Modified 31 Tiller
    36 Snowblower
    42 Blade
    21 Power Drive

    Custom Mini Wagon

    Brinly CC-500
    Hinson No 1977&1978 Weather Shield

  9. #17
    Senior Member
    Display Name: Jerry
    The dutchman's Avatar
    Join Date
    Nov 2018
    Location
    Holland, MI
    Posts
    189
    Thanks
    0
    Thanked 35 Times in 30 Posts
    16 tooth, body is about 4 1/2 tall. Currently no power in my barn so hard to see.
    Attached Images Attached Images

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •