I was planning on purchasing a voltmeter for my 314. While going through a parts box I found an ammeter from a Ď68 112 I parted out. The charging system on the 112 didnít work so I donít know if the meter works. This meter is for a 10 amp system, my 314 is 15 amp. So I have two questions-
1- How do I go about testing the ammeter to see if it is working? I donít want to go through the process of removing the battery plate and wiring it in between the solenoid and ignition switch only to find out it doesnít work. In the past Ive installed voltmeters between the ignition switch and light switch, which isnít as involved. I donít know if an ammeter can be done this way.
2- Will a 10 amp meter be ok in a 15 amp system?
Any input appreciated.
Thanks in advance,