I've found conflicting recommendations for setting the skid shoes on the 54 blade & 49 blower. Well, at least conflicting in my head.
I've got an asphalt driveway thats fairly level. It's pretty old so I'm not concerned with scrape marks.
If I have this right, the recommendation is to set the 49 thrower skids a smidgen lower than the wear bar on the thrower body, so the feet are doing the contact? And for the 54 blade to set the feet higher than the wear bar, but lower than the main blade body so the wear bar contacts the ground but the blade body would not if the wear bar gets too far worn?
Is that the general idea?