My new to me 64 110
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: My new to me 64 110

  1. #1
    Senior Member
    Display Name: Jacob Myers
    DownNdirt's Avatar
    Join Date
    Nov 2015
    Location
    Southwestern PA
    Posts
    161
    Thanks
    32
    Thanked 23 Times in 20 Posts

    My new to me 64 110

    Picked this little gem up last weekend. 1964 110, came with blower, deck, front weights and blade. Swapped out the junk rear tires for a better set of ags and a lot of cleaning and waxing later, here is where I am now. Generator tension bracket is broken because the stud came out of the lower generator bracket and caused it to twist. But I do have decent spark so just have to pull carb and make sure intake valve is moving (may be stuck)but turning into a very solid machine.
    Attached Images Attached Images
    If it's cheap ... its probably going to cost a big stack of green in parts.
    Our herd:
    1974 140 H3
    1986 316
    1970 140 H3 patio yellow

    1986 330 Diesel
    1964 110
    1986 318
    1987 332 Diesel
    cub 1250, 1450

    Attachments:
    Many mower decks
    Many snow blades
    #50, Very clean BT #80, work #80 carts
    All brinly; Very nice KK-200(?) planter, cc-500 cultivator, plows (7x), DD-1200, cc-1000
    Pincor 4500 watt generator
    JD 542 front PTO
    36 blower

  2. Remove Advertisements
    WFMachines.com
    Advertisements
     

  3. #2
    Senior Member
    Display Name: Nate
    MiniHomesteader's Avatar
    Join Date
    Sep 2016
    Location
    Pennsylvania
    Posts
    2,122
    Thanks
    598
    Thanked 500 Times in 403 Posts
    Nice score! And front wheel weights...
    Looks like the mouser approves
    1966 60 (Soon to be 12 HP), 1985 111
    1967 112, 1966 110
    46 Mower Deck, Modified 31 Tiller, 36 Snowblower, 42 Blade
    21 Power Drive

    Custom Mini Wagon

    Brinly CC-500
    Hinson No 1977&1978 Weather Shield

  4. The Following User Says Thank You to MiniHomesteader For This Useful Post:

    DownNdirt (06-14-2020)

  5. #3
    Senior Member
    Display Name: Sublime68charger
    sublime68charger's Avatar
    Join Date
    Mar 2015
    Location
    South West WI
    Posts
    472
    Thanks
    24
    Thanked 66 Times in 57 Posts
    looks good!

    that 3020 in the back ground needs some fenders and a muffler though!

    did they have a front weight bolted up on the back rim?

  6. The Following User Says Thank You to sublime68charger For This Useful Post:

    DownNdirt (06-14-2020)

  7. Remove Advertisements
    WFMachines.com
    Advertisements
     

  8. #4
    Senior Member
    Display Name: Jacob Myers
    DownNdirt's Avatar
    Join Date
    Nov 2015
    Location
    Southwestern PA
    Posts
    161
    Thanks
    32
    Thanked 23 Times in 20 Posts
    Quote Originally Posted by sublime68charger View Post
    looks good!

    that 3020 in the back ground needs some fenders and a muffler though!

    did they have a front weight bolted up on the back rim?
    It had a muffler, but it's rusted completely out (hence the can, have not had time to get another) and I have a set of fenders, just haven't got them on yet. Had an old hiniker cab that got taken off 20+ years ago for the loader we had. And I can confirm he had front wheel weights bolted on as rear ones lol. As you can see that got changed protnto.
    If it's cheap ... its probably going to cost a big stack of green in parts.
    Our herd:
    1974 140 H3
    1986 316
    1970 140 H3 patio yellow

    1986 330 Diesel
    1964 110
    1986 318
    1987 332 Diesel
    cub 1250, 1450

    Attachments:
    Many mower decks
    Many snow blades
    #50, Very clean BT #80, work #80 carts
    All brinly; Very nice KK-200(?) planter, cc-500 cultivator, plows (7x), DD-1200, cc-1000
    Pincor 4500 watt generator
    JD 542 front PTO
    36 blower

  9. #5
    Senior Member
    Display Name: Jacob Myers
    DownNdirt's Avatar
    Join Date
    Nov 2015
    Location
    Southwestern PA
    Posts
    161
    Thanks
    32
    Thanked 23 Times in 20 Posts
    Quote Originally Posted by MiniHomesteader View Post
    Nice score! And front wheel weights...
    Looks like the mouser approves
    Thanks, I knew it was gonna be a good one (totally didn't impulse buy it
    If it's cheap ... its probably going to cost a big stack of green in parts.
    Our herd:
    1974 140 H3
    1986 316
    1970 140 H3 patio yellow

    1986 330 Diesel
    1964 110
    1986 318
    1987 332 Diesel
    cub 1250, 1450

    Attachments:
    Many mower decks
    Many snow blades
    #50, Very clean BT #80, work #80 carts
    All brinly; Very nice KK-200(?) planter, cc-500 cultivator, plows (7x), DD-1200, cc-1000
    Pincor 4500 watt generator
    JD 542 front PTO
    36 blower

  10. #6
    Senior Member
    Display Name: Jacob Myers
    DownNdirt's Avatar
    Join Date
    Nov 2015
    Location
    Southwestern PA
    Posts
    161
    Thanks
    32
    Thanked 23 Times in 20 Posts
    Got the carb off earlier this evening. As I expected, the bowl gaskets are drier than the dustbowl era. Got that on order and some new slicks coming tomorrow for the front. Still need a battery but might get one this weekend hopefully.
    If it's cheap ... its probably going to cost a big stack of green in parts.
    Our herd:
    1974 140 H3
    1986 316
    1970 140 H3 patio yellow

    1986 330 Diesel
    1964 110
    1986 318
    1987 332 Diesel
    cub 1250, 1450

    Attachments:
    Many mower decks
    Many snow blades
    #50, Very clean BT #80, work #80 carts
    All brinly; Very nice KK-200(?) planter, cc-500 cultivator, plows (7x), DD-1200, cc-1000
    Pincor 4500 watt generator
    JD 542 front PTO
    36 blower

  11. #7
    Senior Member
    Display Name: Andy

    Join Date
    Jan 2020
    Location
    lewiston Id
    Posts
    264
    Thanks
    0
    Thanked 16 Times in 11 Posts
    Nice! I like your 3020 too.
    Andrew

    1991 425 all wheel steer, 1972 110, 1973 110, 1948 Farmall cub, 1958 ford 841, 1975 white GT1650,

  12. #8
    Senior Member
    Display Name: Jacob Myers
    DownNdirt's Avatar
    Join Date
    Nov 2015
    Location
    Southwestern PA
    Posts
    161
    Thanks
    32
    Thanked 23 Times in 20 Posts
    Quote Originally Posted by John Deere 110 View Post
    Nice! I like your 3020 too.
    Thanks!
    If it's cheap ... its probably going to cost a big stack of green in parts.
    Our herd:
    1974 140 H3
    1986 316
    1970 140 H3 patio yellow

    1986 330 Diesel
    1964 110
    1986 318
    1987 332 Diesel
    cub 1250, 1450

    Attachments:
    Many mower decks
    Many snow blades
    #50, Very clean BT #80, work #80 carts
    All brinly; Very nice KK-200(?) planter, cc-500 cultivator, plows (7x), DD-1200, cc-1000
    Pincor 4500 watt generator
    JD 542 front PTO
    36 blower

  13. #9
    Senior Member
    Display Name: Kelvin Gebhard
    gabby_in_wis's Avatar
    Join Date
    Jan 2015
    Location
    Southwest Wisconsin
    Posts
    3,337
    Thanks
    389
    Thanked 570 Times in 426 Posts
    The 110 have front wheel weights on both sides?
    Currently in my garages/sheds: 1967 JD112 RF ... 1972 JD 112 SF ... 1973 140 H3 ... 1977 JD 300 ... 1979 JD 216
    1979 JD 314 ... 1979 JD 317K ... 1986 JD 318 ... 2004 JD X485 ... 2011 JD TX Gator ... 2012 JD X720 ... 19XX Zennoh 7001B
    2003 HD Heritage Softail

    Deerely Departed : 1965 JD 110 ... 1967 JD 110 ... 1978 JD 316K ... 1987 JD 175 ... 1987 JD 185 ... 1987 JD 332 w/ 44 loader
    1990 JD 318 ... 2007 JD X300 ... 2015 Z930M ZTR ... 19XX MF 7 ... 1970 Harley FLH ... 1979 Harley Superglide

  14. #10
    Senior Member
    Display Name: Jacob Myers
    DownNdirt's Avatar
    Join Date
    Nov 2015
    Location
    Southwestern PA
    Posts
    161
    Thanks
    32
    Thanked 23 Times in 20 Posts
    Quote Originally Posted by gabby_in_wis View Post
    The 110 have front wheel weights on both sides?
    yessir. Only reason it has just one installed is because i dont have long enough bolts and only have one which didn't break off when I took them off the back. Just had to see what it looked like
    If it's cheap ... its probably going to cost a big stack of green in parts.
    Our herd:
    1974 140 H3
    1986 316
    1970 140 H3 patio yellow

    1986 330 Diesel
    1964 110
    1986 318
    1987 332 Diesel
    cub 1250, 1450

    Attachments:
    Many mower decks
    Many snow blades
    #50, Very clean BT #80, work #80 carts
    All brinly; Very nice KK-200(?) planter, cc-500 cultivator, plows (7x), DD-1200, cc-1000
    Pincor 4500 watt generator
    JD 542 front PTO
    36 blower

  15. The Following User Says Thank You to DownNdirt For This Useful Post:

    gabby_in_wis (06-28-2020)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •