Putting my 318 back together after bunch of work.
On good side the linkage slop and surge is fixed.
Started up good but when going to mow the PTO was inop-ran fine prior.
Wondering what I did to make it not work. Retraced what had changed. Had pan off. Did not mess with any wiring other than...
Anyone have good results to share?
Have 3 or so 2-4"cracks around each seat bolt holes.
Was planning to small bit stop drill, then weld and grind down both sides.
Have a 220 Lincoln 175 Amp MIG welder with CO2 gas.
I just restored my 46 in deck for my 318. All new hardware parts and hardware except the bearing housings and blades. Freshly powder coated as well. Any idea on what this could sell for in MN?
For sale package deal
316 running but not original motor. 317 parts tractor no motor. 110 fender deck. 52”snow plow, 2 48” decks parts. And other parts. Manuals. I have the original 316 motor, I think it has a broken rod.
317 and 316 side panels are there.
or best offer. Valparaiso Indiana 46385
There is a posting in NorCal for a 316 with a 30" hydraulic tiller. Must have been a landscaper, because it includes a tilt trailer as well as other equipment at John Deere 316 with tiller and accessories - farm & garden - by....
It seems like a good deal, but have reservations about parts so...
My machine started acting like it was running out of gas. After seeing the gas was half full, I started pushing on things under the hood thinking something was loose. The wire from the spark plug to the coil seems to be the culprit. When I pushed on the coil end, it ran great. Should I get...
Happy Father's Day!
The 1990 316 has been running better that she has in years. The new carb this winter definitely made a HUGE difference.
I was cutting grass yesterday and she started miss. I moved it over to the shed where I was going to check to see if it was low on gas, even...
I have a 316 with a rebuilt Kohler KT17 series 2 engine. This last snow storm I noticed the tractor losing power as it warmed up. I mean I let run for about 20 minutes before I started blowing snow and it seemed fine for the first 15-20 minutes of blowing snow, but then the distance it threw the...
1987 John Deere JD-316 $1,200.00 Onan P218G replacement, rebuilt hydrostatic pump, newer front tires, new fire wall. - 1,650 Hrs
50" Mid-Mount Rotary Mower $300.00 Some cracks, weld to fix.
Extra Sets of Mower Blades 0.00 Goes with Mower Deck Sharpen and use.
1978 316 Kohler. Engine was rebuilt 5-6 years ago. Little use since. I rebuilt mule drive a while back. Has old style JD hubcaps on front. With deck $850 obo I moved to location with a steep driveway. Chains were scratching up drive. That & shoulder surgeries had me move into 4wd machine with...
Hi I have a John Deere 316 with a rear hydro static PTO that has a broken receiver on the tractor. Ive been told the part number is am39995 if anyone has one or knows someone with one please let me know. Thanks
I've got a situation that's stumped me, but more importantly, has stumped my uncle who has 50+ years of experience with small engines.
Here's the situation:
I have a surge in my 316. It has the Onan B43G in it. The engine is fresh. It was originally a generator and never got used...
I have joined this forum because my dad has owned John Deeres since I was little and they just keep on chugging. Hes now up to 4 of them. I am purchasing a piece of land that warrants the use of a tractor and I think that a Deere is the way to go. I'd like to start figuring out which tractor...
I have what I believe is a 316 mower deck (M00596X) and I want to use it on a 300 (C300F).
Is this possible and what is involved? I see the rear attachment arms are different, what other issues will I find? Belt?
I have removed all the bolts on the gear box (including the 3rd one behind the brake rod)
I removed the steering wheel as well as the pitman arm.
The box is free but no room to maneuver it out the bottom (as I hear that is how its done.)
Q: Do i need to remove the hydro lines? is...
I removed and cleaned the entire air cleaner assembly on my 1990 316 with an Onan. I used spray carb cleaner and adjusted the carb screw. I even checked the adjustment with the rotary engaged. However, when I reassembled the air cleaner, the engine now surges (again) after the surging...