Weekend Freedom Machines banner

adjustment

  1. 210 variator adjustment bolt slipping?

    Gear Drive Tractors
    Hi all, New to the forum and new to the John Deere community with a 1980 210. The tractor is in good shape, but I have been going through it to make sure there aren't any loose nuts or screws and that the belts are adjusted appropriately. I adjusted the variator based on the instructions in the...
  2. 1988 318 Starter Adjustment: Chewing Flywheel Teeth

    Hydrostatic Drive Tractors
    Hi, I have a 1988 318 with the Onan P218, and the starter is loose / slipping and chewing the teeth on the flywheel gear when it tries to engage. I pulled off the side panels, but can't find any way to reach inside to tighten and adjust the starter. Do I have to pull the engine out to get to the...
  3. JD 140 '73 - Starts, Idles, but rough to rev.....HELP!

    Hydrostatic Drive Tractors
    Hi guys.....I'm a new WFM member and proud owner of a 73 JD140 H3 that I got a month ago. It sat outside for 2 years and is pretty rough, but it is a beast and I got a 33 Tiller with it....so gotta get going! I had the carb removed and ultrasonically cleaned and put back on. Guy said he set...
Top