Weekend Freedom Machines banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. Hydrostatic Drive Tractors
    My 314 has ~700 hours on it since the engine was re-built. It gets regular use summer and winter and generally I leave it be if it's running well. This summer it started to run a bit rough after ~30 minutes of mowing, never stalling but threatening to stall, usually when under a heavier load...
  2. Hydrostatic Drive Tractors
    I replaced the points on my 318. I used the flywheel and got the points to the widest opening, then have been trying to get them closed to the proper spacing (.020) and they won't close, they are stuck wide open and I can't get them to close. Any ideas?
1-2 of 2 Results