Looking to buy a Hydraulic lift MCS. I am located in MN. I have a tilt dump one now so If it is in tough shape I can swap drive and blower parts from my current MCS. Let me know what you have and where you are located at.
I’m having trouble diagnosing an issue with the rockshaft on my 1978 316K. It seems to be weak in only one direction. I have the mower deck removed and don’t have any other attachments, so it’s a little difficult to say for sure, but it sticks/lags when I push the lever forward. No such problem...
I've got several random parts to get rid of.
M89324: Right hand side grill cover for a 322/332 - $30
2 Front turf tires in fair shape + wheels with a decent coat of rattle can yellow (dismounted) 16x6.5-8 - $40
AM116154: Rockshaft Cylinder, works fine - $40
Set of all 4 gauge wheels with the...
For sale is my model 30 hydraulic tiller for the 300/400 series tractors.
This is the rear PTO driven version.
Comes with installed 12" extension.
Package comes with the REAR PTO and associated hardware.
Tiller comes with 3 point hitch mount as shown.
Package comes with...
FS: John Deere 400 lawn and garden tractor serial number 192XXX which means it's a 1982. Original Kohler K532 Engine turns over and backfires, but won't start. No deck. 910hrs All tires hold air and have tread (one is brand new Carlisle) All body panels present. Hood in good condition...
Model 30 Hydraulic Tiller + 12" Extension with all mounting brackets for 318. Not as nice as the NOS that Layne has posted but this appears to have plenty of life left in it. I'd say that the tines are about 50% (except for 1 that is broke). Asking $1,200 obo.
I also have #49 snowthrower...
I'm repowering my 318 with the 23 Hp Briggs & Stratton Vanguard kit from Small Engine Warehouse.
Everything is going pretty well, but I am replacing all of the fuel and flexible hydraulic lines while I've got everything dismantled. I disconnected the AM39311 Hydraulic Oil Cooler from the...
In search of a usable pedestal for a Hydraulic Lift 110, wanting the steering/dash support pedestal. (JD Part # AM30667) Doesn't need to be perfect as I'm just looking to have a functional tractor at the moment. I'm in southeast Wisconsin.
Good Afternoon WFM,
Today I attached the 54" plow on my 1983 318 only to find the inner hydro control arm, the one used for the up & down control with the detent position, inoperable. You can move the lever slightly, what I'd consider free play, but that is all. The lever feels jammed and...
I'm fixing a '73 140 and sat out for 2 years. Hydraulic levers all move together in one motion rather than independantly. I removed the set screw on the last arm on the inside (and the linkages to the spool valve obviously), but damn thing won't come off.
Am I missing something, as I don't...
Has anyone used a log splitter on a 332 diesel? I am wondering if the front hydraulics are enough or is it better to use the rear PTO and an independent hydraulic system for the splitter.
I just installed a CTC fron end loader on my tractor and it works really well. Expensive but high quality.
I've had this project in mind for a while, but finally got it done yesterday.
Took my 30" tiller lift system and re purposed it to lift the aerator. I have the AgriFab smart-link system, so this setup should allow me to do aerating, de-thatching, and rolling if i get the right attachments...
I finally found the time to change the manual chute rotation to hydraulic on my 49 thrower. I had been studying other options for some time, but went hydraulic and finished it up today.
Here are some articles I bookmarked as I was researching which might be useful to others...
For sale is a 30" hydraulic tiller for 210, 212, 214, 216, 316 S.N. 285001-, 318, 322, 330, 332, 420, 430 Lawn & Garden Tractors.
See Deere parts catalog 1988 for details.
Included is the tiller alone. All Brackets, pump, motor, and filter assembly are NOT included.
Tiller is in excellent...