I recently bought 2 John Deere 400's. One runs one needs a few pieces. Both need love lol. They came with 1 set of #20 loader arms , a rototiller and mow decks neat machines can anyone give me some knowledge. Can't decide if I should just sale them or rebuild them.

I am looking for the drive shaft of a 50 / 47' blower that attaches to a john Deere 400. The part # is AM36610 (see picture) I bought a JD400 with a blower but the seller didn't tell me that the drive shaft was the wrong one... If you any place where I could find this part (e.g. salvage yards)...

This 400 had been sitting for the better part of 4 years with a full tank of gas. I wouldn't believed if someone told me but after turning it over a couple of times it fired right up and ran perfect.

So i just picked up a 81 400 and was going through it. I noticed a leak in the steering valve so i pulled it off and replaced the o'rings. No leak now but it only steers to the right, its really hard to get it to steer left. I jacked the front up and removed the two hoses and moved the steering...

This is a classic, commercial grade lawn tractor in very good shape! Features include: 60" Grass Cutter, New Starter and Battery, Tuned Up in the Spring (Fully serviced including attachments), Snow Blower Attachment Price: $4200 CAD Location: Leamington, ON Canada Contact: [email protected]

Looking for a model 50 snowblower for my 400. Posted this one before over the summer and kind of forgot about it. Definitely ready now that the snow is here. Let me know. Prefer somewhere in Michigan but will pay for shipping if farther.

FS: John Deere 400 lawn and garden tractor serial number 192XXX which means it's a 1982. Original Kohler K532 Engine turns over and backfires, but won't start. No deck. 910hrs All tires hold air and have tread (one is brand new Carlisle) All body panels present. Hood in good condition...

Since my hydro pump died on me earlier this year, I'd figure I should have a spare in my shop incase it happens again prior to a big snow storm. I started rebuilding a non-working pump and determined the problem. Like other members on here, with the Sundstrand 15 in-line, my problem is the...

So the weather is nice enough to where I can start to do an assessment of my 77 JD400 parts tractor, to determine whether or not to return it to "functional". I purchased it as a parts tractor for my 75 JD400, and have since swapped out the hydro and rear end. As I'm preparing to clear all the...

I have a Kohler K532 that I pulled out of my 400. It is complete and was still running (although the right side connecting rod is gone). The carburetor, starter, stator were all working. Let me know if you want an individual part. I would sell the complete engine as it sits for $100/offer/trade...

Just swapped out the transaxle/hydro of my JD400 a few weeks back, and figure I put my lessons learned on here in case it can help someone else, like me, that's doing it for the first time. First, some background; I have a '75 JD 400 with a custom FEL. The PO built the FEL and used the tractor...