Weekend Freedom Machines banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Hydrostatic Drive Tractors
    I recently picked up a pretty nice 1974 140h3 but it came with a engine out of and older h3 (70-71?) with a clutch set up instead of just a drive hub like I believe the 74’s had. Am I going to run into any problems putting the engine in and leaving the clutch on it and just having it non...
  2. Hydrostatic Drive Tractors
    I'm doing some engine work on my 140 engine. Will this gasket set work? It says it's for the Kohler K321 and at face value looks to contain the same gaskets as the one from JD and others for quite bit less money. Any insight would be appreciated.
  3. Want To Buy
    Hi, I'm in need of a 314 muffler for a K321. Part AM37736. I think also fits a 312. I can find them new for $115. Ideally there would be one out there in a solid condition, no rot, no weld breaks, no rattles. I'm in MA and shipping is probably best. Anyone? Thanks
  4. General Repair
    Following a head gasket leak on my rebuilt K321AQS and subsequent replacement of the head and gasket, I also cleaned out oil that was spewing from the blower. I replaced the gaskets, disassembled, then carefully put back together to ensure all the parts were in the right order and facing the...
  5. General Repair
    Background: Following a loud bang the other night where the engine suddenly stopped in its tracks, I replaced a cheap fried coil with another Bosch and installed a new voltage regulator for good measure. I then reinstalled the spark plug after testing for spark and chewed up the threads in the...
  6. Hydrostatic Drive Tractors
    In relation to my dead Kohler 321AQS on my 314 (http://www.wfmachines.com/forums/showthread.php/47177-314-starts-and-runs-fine-then-engine-started-to-die/page6?highlight=314+stalls) I am looking for a repower option. This options appear to be: 1. Harbor Freight (apparently a Honda 'clone')...
  7. Hydrostatic Drive Tractors
    Hi guys.....I'm a new WFM member and proud owner of a 73 JD140 H3 that I got a month ago. It sat outside for 2 years and is pretty rough, but it is a beast and I got a 33 Tiller with it....so gotta get going! I had the carb removed and ultrasonically cleaned and put back on. Guy said he set...
1-7 of 7 Results