Weekend Freedom Machines banner

points

  1. 314 Timing issue

    Hydrostatic Drive Tractors
    My 314 has ~700 hours on it since the engine was re-built. It gets regular use summer and winter and generally I leave it be if it's running well. This summer it started to run a bit rough after ~30 minutes of mowing, never stalling but threatening to stall, usually when under a heavier load...
  2. Having trouble closing the points on my 318

    Hydrostatic Drive Tractors
    I replaced the points on my 318. I used the flywheel and got the points to the widest opening, then have been trying to get them closed to the proper spacing (.020) and they won't close, they are stuck wide open and I can't get them to close. Any ideas?
  3. To coil or not to coil? 318 w/B48G and points

    Hydrostatic Drive Tractors
    I have been chasing a sporadic issue with my trustworthy 318 that has a B48G transplant (points) for the past several weeks. I am 93% sure its ignition related and not fuel. I get plenty of fuel to the carb and I did a quick carb clean anyway since I hadn't done that in...well ever on this...
Top