Weekend Freedom Machines banner

100 engine model number 190707-????

1017 Views 4 Replies 3 Participants Last post by  mhuggler
I'm trying to find the part number for the crankshaft on my 100. The briggs 190707 was available with at least 7 different cranks so I need the 4 arrangement numbers after the model number. My engine data plate is missing of course. Any help would be great.
1 - 5 of 5 Posts
The only thing I would tell you is Briggs hasn't made that crank for about 20 years so good luck and welcome to WFM. Roger
According to the John Deere 100 Service Manual (SM-2106) the complete type code was 5147-01.
If that is what the manual says the original crankshaft number was 261084 and the current number is 492452. That is the good news and the bad news is the cost in the place I looked $162.32 plus shipping. I sure you can find it cheaper. Apparently Briggs found another crank that is the same and will interchange. Roger
Thank you for the help! I was able to pick up a new crank on ebay for $50. FYI for anyone else that needs one; the john deere part number is AM35739 and there are two more left on ebay.
See less See more
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.