Weekend Freedom Machines banner

140 H1 wiring harness---HELP

1026 Views 3 Replies 2 Participants Last post by  H.D.Bledsoe
I'm finally at the point of building a new wiring harness and I can't find the diagram I had printed up. It's an early model T5081 003122M that has point ignition. Any help I can get would be great, thanks, Ken
1 - 3 of 4 Posts
If you can e-mail a harness diagram that would be great. I found the one on this forum, but I can't print it up and I'm getting tired of running in and out of the house with every wire.
Well, never mind, I figured it out by myself.
1 - 3 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.