Weekend Freedom Machines banner

140 mule drive

547 Views 2 Replies 2 Participants Last post by  thebadfrog
Had to rebuild my mule drive on my '69 140. The PO had welded washers trying to get rid of the slop but it was failing. The adjustment knob would not work. The weld had broke and now I don't know what position to reweld it. Also it looks like this mule drive came off a patio, once I started sand blasting it, it turned from black to white then metal. Any sketches or ideas on what position the bracket should be. Thanks for the help.
1 - 2 of 3 Posts
WOW!!!!!!!! That is exactly what I needed to see. Now I'm going to do the same thing with mine. Grease fittings and all. Thanks for the help. I knew someone had done this before.
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.