[mrbacklash]

I should be getting the HAPCO kit in soon and don't remember a couple decals being on the tractor before I blasted it. The ones I have questions on are the tecumseh clearance/fuel, and patent sticker. Pictures would be awesome or measurements would work also. Also for the hood are y'all using winded/soapy water to position them?

 

[smalljob]

I use soapy water for all of them. I just did it for the dash decal.

 

[mrbacklash]

That's what I was thinking I have done it for very large vinyl decals and it works great do the hood decals pose a problem since they are rolled up?

 

[herg]

I just used scotch tape to hold one long edge of mine where I wanted, then slowly peeled the backing away a little at a time

 

[smalljob]

I didn't have any problem with the rolled up ones. I did put the hinge pin to help keep the correct position.

 

[johndeereelfman]

Harry,

With your set of decals from Hapco, you will find a decal placement sheet that will show you where each decal is to be positioned on the tractor.

 

[mrbacklash]

Awesome, they really are a great source for parts!