Weekend Freedom Machines banner
1 - 3 of 3 Posts

· Registered
6,867 Posts
The bottom half is the same.

You could get a 212 one and put the 140 worm gear/shaft in it, and cut the outer tube down to the 140 length. Tube is pressed in and dont know that you can get it out without destroying it in the process.

The first 140 I got I got for cheap since the threaded holes in the box were all trashed and the dealer told them it was going to be several hundred to replace.

I got a 200 series one for $5 at a swap meet and made it work.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.