[420glh]

Is the 3 point for a 420 the same as one for a 318? I want to use the plans on WFMFiles, but just needed confirmation since there's no 420/430 plans there.

Nevermind! Found this link and saved the drawings. It should be added to wfmfiles for posterity though.

http://johndeere.fr.yuku.com/topic/159/318420-3-Point-Hitch-Plans#.VEFQYPm-UZh

 

[T-Mo]

Nick,
Yes, the 3 point for the 318 works on a 420 and 430. Btw, that was my website and those are my drawings that I made off of plans that Neil posted here a few years ago.

 

[420glh]

I'm running a copy to the plotter as I type this, might have another after work project soon. I submitted that link to the wayback machine, in case anyone looks for it later and the links are dead.