Weekend Freedom Machines banner
1 - 5 of 5 Posts

· Registered
Joined
·
227 Posts
Discussion Starter · #1 ·
My machine started acting like it was running out of gas. After seeing the gas was half full, I started pushing on things under the hood thinking something was loose. The wire from the spark plug to the coil seems to be the culprit. When I pushed on the coil end, it ran great. Should I get any resistance from that wire? It was pulling about 7 on the meter. I purchased a new wire, and it's pulling a little over 5. Is the problem my wire?
 

· Registered
Joined
·
2,882 Posts
Typically spark plug wire is of resistance type, so that seems to be ok. Sounds more to me like it is just the connection at the coil.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top