Weekend Freedom Machines banner
1 - 1 of 1 Posts

· Registered
303 Posts
Discussion Starter · #1 ·
Does anyone have the trade part numbers (skf, timken, etc.) for the input shaft seal, trunnion shaft seals, and output bearing on the 317 hydro. Parts are too beat up to make out any id. Also, is the output bearing supposed to be a cylindrical roller with no inner race, or is a bearing with inner and outer races supposed to be used. Currently, the od of the shaft rides on the rollers, but who can be sure if anyone messed with something previously.

Like to
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.