Weekend Freedom Machines banner
1 - 2 of 2 Posts

· Registered
4 Posts
Discussion Starter · #1 ·
I bought a 318's 46 power flow a while back and finally rebuilt a 318 deck, and built a bagger bracket so its all fabbed up on the 317. My question is the double pulley i was provided sits higher than the other 2 pulley is this normal or is this say the 50inch double pulley. The way it looks this setup will burn up the belt with the tensioners pulley.

Thanks if anyone wants I can post pics of the conversion
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.