[livinlo]

Hello,
I am closing in on my conversion and wanted to know if someone have a wiring diagram for the Onan to the Briggs? I just wanted to double check everything.
Thanks,
Brent

 

[captaindan]

Brent, Her is a link to a 420 repower using a Vanguard 23. I have a diagram that shows how to connect the existing tractor wiring to the Vanguard.

https://plus.google.com/u/0/photos/106460198938703134721/albums/5618088907666583873?authkey=CKj71azXzvnyxwE

 

[captaindan]

This other link my also be helpful it is a bit more generic but has the discussion on the wiring. Hope this helps, Dan

https://plus.google.com/u/0/photos/106460198938703134721/albums/5639007081452077649?authkey=CMiPiu7uzNK5JQ

 

[livinlo]

Dan,
Great job on the conversion. Thanks for the information, I will have to post a couple photos.
Brent

 

[livinlo]

Dan,

Your pictures are labeled John Deere repower procedure without a kit. Is there a wiring harness that I can purchase or just cut splice and heat shrink?

Thanks,
Brent

 

[captaindan]

The purpose of the picture presentation was to help folks who wanted to repower without a kit. You will need to add connectors or splices as you desire but the wires need to be connected as in the diagram.
Dan

 

[craft57]

Dan : your diagrams were flawless … they helped me a lot, even when I re-powered to the Kohler …. from the aspect of understanding the JD side of things ……. Between You, Chuck and JLang pics it made my job without a kit a piece of Cake !!! …..

10-thumbs up to you guys !!! …….. GK

 

[buckplots]

Dan, I did a repower tried to open your link It wouldent let me any way to repost your pictures thanks Glen