hi everyone im very new to the site .i want to take a second and say that this is a very useful website and like to thank those who created it,and all the members who respond to it.the question i have is after replacing the steering cylinder (with a new one from dealer)how does the steering wheel get centered.do you pull the cylinder out to where the original was or should you leave the one end disconnected until you run the engine and purge the air out of the system,then connect the cylinder to the linkage.
![]()
![](/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/http://www.wfmachines.com/cgi-bin/discus/board-post.cgi?action=posting_upload_form&what=show&img=171980" alt="wfm resized pic.jpg)
