Weekend Freedom Machines banner
1 - 4 of 4 Posts

· Registered
4 Posts
Discussion Starter · #1 ·
Recently acquired a 318 with the 30 inch hydraulic tiller. The previous owner said the belt that drives
the belly pump wouldn't stay on its pulleys due to
it being a generic belt (he had it tied up to one
sided of the machine to keep it off the ground)and
that i needed to get an original deere belt. I called the local dealer but they couldn't identify the belt that i needed. I measured the
generic belt that came with the machine and it is around 85 inches. Could anyone please tell me the right size belt and maybe the JD part #. Thanks in advance!
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.