Weekend Freedom Machines banner

332 belt adjustment

589 Views 3 Replies 2 Participants Last post by  steveh
I just purchased a 332. The previous owner said that the linkage was repalced, and they installed a new belt. Is there an easy way to adjust the belt, and how tight should it be?
1 - 4 of 4 Posts
What linkage and which belt are you referring to?
It is the linkage box from the deck to the engine.
I assume you mean the mule drive and the primary deck belt. If so, there is a knob on the front of the mule drive that is used to adjust the belt tension.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.