[Insbroker2]

My 345 has started blowing fuses. I had installed valve cover gaskets and hosed off the oil that had leaked. It ran for about 20 minutes then blew a fuse. It blows them as soon as the key is turned on. Any thoughts on what to check? I don't see anything touching the circuit board.
Thanks.

 

[woodpecker41]

You have a wire some place on the tractor that has worn through the insulation and is shorting out. Could be anywhere on the tractor. Good luck finding it. Roger

 

[jdmaninlouky]

H2o is a preeeettttyyyy good conductor of electrons,as I remember from days welding knee deep in mud holes,while connecting people up to natural gas

for the local utility co.I've since retired from.

Try blowing everything dry with comp.air , leaf blower , hair drier , what have you.Set it in sun and wait.,Let it cook for a few hours and see if things change.

Thats all I got.

Dave

 

[Insbroker2]

Thanks guys, I'll try that. It's been over a week so it should be dry, but maybe not. Happy 4th.