Weekend Freedom Machines banner
1 - 2 of 2 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
Resto of my 66 110H is about complete. But... will have to pull transaxel yet. Growls really load in all gears. I found a parts unit locally but cannot get RH wheel hub off. I have tried heat & PB soak for couple days now but no go yet. Is there a way to split the case w/o getting that hub off? May have to sacrifice the axel ie cut it off. Any advise is welcomed & appreciated. Ken B
 

·
Registered
Joined
·
3,365 Posts
It think it will come apart with just the left hub removed. Some of the WFM guys have cut and split the hub off of the axle rather than destroy the axle. If the axle is moving around in the case, it may have a grove and be junk anyway. It is possible to take a big brass drift and a 2 pound hammer and pound out on the flange, finally the snapring will let go and the axle will come out.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top