Weekend Freedom Machines banner

420 Won't Start

4844 Views 12 Replies 6 Participants Last post by  hankvc
I can jump the solenoid with a wrench and the tractor will start with the key turned on. No issues, I can mow the whole yard but once I turn off the key switch I've got to jump the solenoid again to start it.

I had issues mid winter when the brain box terminals were corroded, those got cleaned and dialectic greased. At which time I did all the plugs on the wiring harness.

I've replaced the solenoid, key switch, fuse block. It just won't send juice to the solenoid when I turn over the key switch. Is it a safety switch?
1 - 1 of 13 Posts
i have john deere 35A rotor tiller and drive shaft for sale.$1500.........call me 913 441 4701 kansas city kansas
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.