Weekend Freedom Machines banner
1 - 2 of 2 Posts

· Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
My 430 has 707 hours on it and it is in great shape. THe only problem is the lights do not work. I checked the wires and everything is connected. I looked at the fuses and it only has two fuses? It is missing the two in the center. Would these be the one for the front and rear lights? All the dash lights are working.
 

· Registered
Joined
·
3,271 Posts
They are slots to hold two extra fuses. Check power up to the light switch. If there-then you just need to trace. Either way-keep tracing the lines back/forward. Fathers lights were cut out and had a bare cut on the ends and a badly installed automotive switch as well. Very important is to also check for good grounds.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top