[ontarioal]

Folks
You all have been very helpful in the past.
I have a leak that developed this morning, I have it narrowed down to one of the rubber lines (hopefully) that connect to the lower rad tank.
Before I take everything apart and go in from the top or is there a shortcut by coming up from underneath.
Anybody been there done that?
Thanks in advance.
Al

 

[ontarioal]

Found the problem. My oil cooler on my 430 is in front of the rad. I had to partially remove the 47 blower so I could get the rad screen bezel out.
And low and behold there was the blown rubber hose. My serial number indicates my machine is at least an 1989 model. so I hope this helps somebody in the future.
Al