Weekend Freedom Machines banner

48" deck rebuild

1418 Views 18 Replies 11 Participants Last post by  chad_s
I have a 78' 316 with a 48D deck. My spindles and starting to get noisy and there is a rust hole in the top front of the deck. How expensive are these decks to restore or would I be better off to start shopping for a refurbished deck. What are my options for a deck that will fit my tractor.
1 - 2 of 19 Posts
Thanks for the information. The cost of refurbishing this deck is cheaper that I had imagined. It looks like I will be heading to my local dealer on my next day off. I hadn't really though about stripping and repainting my deck but what the heck. I recently picked up a single cylinder 54 blade for $150 and I might just go ahead and paint it at the same time.
1 - 2 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.