Weekend Freedom Machines banner

49 blower gearing

661 Views 11 Replies 9 Participants Last post by  jdmaninlouky
I posted on this quite a while ago but I've seen it come up a few times and had some emails about it, so I'll post it again.

For anyone who thinks their 49 blower doesn't throw the snow far enough, try changing the driven sprocket (on the auger) to one with 4 less teeth than what is currently on it. This is the equivalent of the 10% speed-up pulley on the 50" decks. You'll get around 8 feet of extra distance on the snow and probably notice it doesn't plug up quite as easy with heavier snow either. It puts slightly more load on the engine, but nothing serious.

I did this to mine last fall and now I don't have to throw the snow twice just to clear the driveway.
1 - 1 of 12 Posts
Hey Pete, Found Gear/Hub plus master link at Fleet Farm store Total cost $26.00 and two hours later done Thanks Ken
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.