[Rod in MN]

I’m wanting to take a JD blade from a 110. I have all of the mounts cut off the blade. I’m looking for how high of the ground are the holes are for the bottom lock pins. How far from the back side of the holes are. Same with the pins on top that hook on to the quick hitch. The same with the trip spring mount to the flat plate on top of the blade
Or maybe some has a computer draining of it welded to the back side of the blade.

I want to make the blade look like the New Blades are

Thank You
Rod in MN i

 

[Rod in MN]

This is what IM looking for if someone has it drawn up like a blue print of the mount that is welded on to the back of the blade so I can mount on to a X738 tractor. If anyone can help me out. I have this blade on hand and do not have the money for a new style blade

Thank You
Rod in MN

 

[Rod in MN]

No one has taken a old blade and make it fit on a newer tractor with a quick hitch on front??

Thank You Rod in MN

 

[woodpecker41]

It wouldn't be worth the effort. Sell the old blade and buy the right one. Roger

 

[jake_vc]

The X738 uses a 54" and 60" blades, the 110 used a 42" inch blade, which is also not as tall as the 54 and 60 inch versions. Like woodpecker said, sell the 110 blade and put the money towards a newer 54" blade.

 

[Rod in MN]

It will be hard to sell it with the OEM mount cut off

 

[jammin]

I don't know if this is what your looking for, but it is what I have done to convert to the quick hitch style mounting.