Weekend Freedom Machines banner

54C blade mounting

1214 Views 12 Replies 5 Participants Last post by  charms
Does anyone have a picture of the bracket used to mount a 54C blade to a 120/140 or 300 series? I bought a 140 and it came with a bracket that I'm unsure of. Still can't seem to post a picture of it.
1 - 1 of 13 Posts

The bracket is in the lower left hand corner of this exploded view of the 54C blade...

As Hapco (one of our site sponsors...) sells these, there is a good photograph here:

See less See more
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.