Weekend Freedom Machines banner
1 - 9 of 9 Posts

·
Registered
Joined
·
2,625 Posts
The blade on a 5x rider works surprisingly well with light snow on level sidewalks and driveways. With weight of the engine and operator over the rear wheels traction is very good. My blade was almost NOS and the rubber squeegee edge was perfect. It scrapes surfaces clean without leaving any marks. Stan
 

·
Registered
Joined
·
2,625 Posts
Sorry, no. But you can see a diagram of the mount and lift on JDParts.com, catalog 1010. I had to drill four mounting holes in the frame at the front of the tractor and mount the clip for the lift lever on the side of the steering pedestal.
 

·
Banned
Joined
·
14 Posts
is that the 38 or 40 blade on that mower i have a 56 and am interested in getting a blade for it so i can get rid of my snowblower and just use that..any help would be nice also wondering if you know if one can still be ordered for jdparts i found the diagram...thanks
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top