Weekend Freedom Machines banner

66 110 RF Belt adjustments

35940 Views 5 Replies 2 Participants Last post by  woodpecker41
3
Hey guys,
Down to the final stretch of my restoration.Don't have a manual. I know I should get one.. but....
Found two great you tube videos for the variator and PTO adjustments but cant find anything for the rearend adjustment. I have all new belts.So... I am asking for some help with the adjustment and which one comes first and what the procedures are.. Thank you !!
Russell





(Message edited by treed on June 18, 2014)
See less See more
  • Like
Reactions: 1
1 - 6 of 6 Posts
2
Sorry for the double pictures..Here is more.



(Message edited by treed on June 18, 2014)
See less See more
2
More. latest pics.



(Message edited by treed on June 18, 2014)
See less See more
There aren't any rear end adjustments. When you put the transmission in the tractor make sure it is in the front set of bolt holes. This is especially true with new belts. Roger
Forgive my ignorance but what front holes? Mine has slotted bolt holes.

Thank you..
4
Slide it to the front of the slots. One set of the transmission bolt place originally had 2 holes. It may have been converted to a slot also. The first 2 pictures show places with 2 bolt holes and the last 2 show places the factory slots. Roger







See less See more
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top