Weekend Freedom Machines banner
1 - 6 of 6 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
Hey guys,
Down to the final stretch of my restoration.Don't have a manual. I know I should get one.. but....
Found two great you tube videos for the variator and PTO adjustments but cant find anything for the rearend adjustment. I have all new belts.So... I am asking for some help with the adjustment and which one comes first and what the procedures are.. Thank you !!
Russell





(Message edited by treed on June 18, 2014)
 

·
Registered
Joined
·
10,657 Posts
There aren't any rear end adjustments. When you put the transmission in the tractor make sure it is in the front set of bolt holes. This is especially true with new belts. Roger
 

·
Registered
Joined
·
10,657 Posts
Slide it to the front of the slots. One set of the transmission bolt place originally had 2 holes. It may have been converted to a slot also. The first 2 pictures show places with 2 bolt holes and the last 2 show places the factory slots. Roger







 
1 - 6 of 6 Posts
Top