Weekend Freedom Machines banner

67 112 restoration

979 Views 4 Replies 4 Participants Last post by  10siberians2d8
Currently working on the motor, a HH-100 techumseh engine and I am looking for some fasteners. Any suggestions? Any help would be greatly appreciated. In particular, I am looking for 3/16 machine screws with a philips fillister head for the carb intake tube. Thank you for your time.
1 - 5 of 5 Posts
I also use socket head cap screws on all my RFs. On a Tecumseh they are 10-32s screws not 3/16ths. Roger
Go to Fastenal they will get you what you need. I have got similar screws for my RF 112 from them.
Thanks for your help gentlemen, I found what I was looking for at Fastenal.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.