Weekend Freedom Machines banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Question... I'm restoring a 1973 70 and I just bought a 1969 60 for parts..the 70 has the aluminum block and the 60 has a iron block..any way my question is the rectifier,wiring, and coil is in much better shape on the 60 as it is on the 70,,can I swap all that over to the v70 from the VH 60? I would just use the VH 60 but I just rebuilt the v 70 and I know I'm probably doing this backwards but you all know how hard it is to get parts for these engines and I came across this overhaul kit for this v 70 so I snagged it! Also is there any timing to do other than aligning the timing marks on crank and cam gears?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top