Joined
·
6,502 Posts
Hmmm, petrified rubber...rusted rivets. I'd swap em for new given the shape the engines in...cost is like $30.
Posts by tmac58star
1 - 6 of 6 Posts
Joined
·
6,502 Posts
Okay, so $55 for all four.
Joined
·
6,502 Posts
I think new mounts make a difference, on my 212 and especially on the 216.
Joined
·
6,502 Posts
On both the 212 & 216 with old mounts anything I put on top of engine while idling would walk right off/vibrate off. With new mounts I can leave screwdriver, pliers, etc. on engine while idling and they vibrate a little but stay put. The 216 also shakes less after you turn they off.
Joined
·
6,502 Posts
True, but there is no other way to adjust idle circuit on carb. They also run at idle for a minute or so before they are turned off. Haven't checked the idle speed on either one since setting the carbs/idle according to service manual...can't remember that value offhand.
Joined
·
6,502 Posts
Wise choice, they look pretty toasty.
1 - 6 of 6 Posts
