Weekend Freedom Machines banner
1 - 5 of 5 Posts

· Registered
80 Posts
Discussion Starter · #16 ·
On both the 212 & 216 with old mounts anything I put on top of engine while idling would walk right off/vibrate off. With new mounts I can leave screwdriver, pliers, etc. on engine while idling and they vibrate a little but stay put. The 216 also shakes less after you turn they off.
Do you know what the idle rpm of your 212 is set at where the tools stay on the engine?
1 - 5 of 5 Posts