318 W/ 48" deck, hyd tiller, 49 snowblower, 519 cart. Traded in
Joined
·
124 Posts
On my X738 I have the auto correct on it. Know putting on the snow blower on I have to lock up the draft linkage I raise it up but the last little bit I have got use a pliers to get the latch in place and none of the holes line up. I had it off to straighten it out?
The PTO shaft to get in the hanger it bents the suction hose so now I have a little hole in the hose .Does the PTO shaft go above the suction hoes ???
I just to the coupler end of and wired the shaft up. I had snow to blow.
I cannot find in any book on how it goes?? They do show the lock up
Thank You
Rod in MN
The PTO shaft to get in the hanger it bents the suction hose so now I have a little hole in the hose .Does the PTO shaft go above the suction hoes ???
I just to the coupler end of and wired the shaft up. I had snow to blow.
I cannot find in any book on how it goes?? They do show the lock up
Thank You
Rod in MN
