Weekend Freedom Machines banner

Blower on 400 need mounting help!!!

860 Views 16 Replies 11 Participants Last post by  ktoddf
I am wondering if there is a easy way to mount the blower on my 400?I am having a heck of a time trying to get it on.do I need to block it up and drive into it?brad
1 - 1 of 17 Posts
Well guys,
I just mounted my blower on my 430 today. It's not a 400 , but I had one of those years ago, What I did , was when i had my blower mounted, I built a small dolly for the blower, about 2 inches or so from the ground. I put swivel rollers on it. It makes it easier to install the blower, and at the end of the winter season I just pull into my shed and lower the blower on the dolly, and disconnect. takes just a matter of seconds to detach, and I can install it in about 5 minutes or less. I also put my 430 in neutral to install that way i can move the blower on the dolley, or move the tractor to get the two attached while holding the pto. Hope this helps
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.