Joined
·
5 Posts
*****I will admit this is gonna be my first attempt at restoring a lawn tractor. So please, PLEASE, dont be afraid to point out tricks to help/save me. (it might be badly needed) *****
With that said, on with the show!
Overall the 112 is in decent shape for its age, expect the deck is beyond repair, so just gonna be a tractor restoration until I get a replacement deck. As some linked pics show it has some cancer but nothing serious from what I can tell. In the next two days I will start the teardown process and get to a bare frame. Then from there repair any weak spots and 'correct' a couple of things. One being the shifter shield I want to fab that up in metal since fiberglass just doesnt look right on a tractor thats 99% steel. The hood will either be repaired or replaced with an aftermarket depending on how the build goes. If I feel up to it that hood will be fabricated in metal too. Alright for the motor my 112 came with a MM100 10hp motor. I dont care for Tecumseh, so I'm gonna attempt to repower this tractor with a V-twin Briggs & Stratton 13hp motor.
Yes I know this is a bad idea. :bash: yet I feel it can be done in a matter that doesnt destroy the looks. Yes, Ive seen pics of a repower gone bad and this is just encouragement for me to do an even better job on mine. Yes I have done some research on this. Yes I know what I'm doing (sorta) and yes, these are famous last words!
So... yeah, lets get started! Also I'll update as I make some decent headway.
P.S. Dear Admin let me know if my pics get out of hand on the size thing, thanks!
With that said, on with the show!
Overall the 112 is in decent shape for its age, expect the deck is beyond repair, so just gonna be a tractor restoration until I get a replacement deck. As some linked pics show it has some cancer but nothing serious from what I can tell. In the next two days I will start the teardown process and get to a bare frame. Then from there repair any weak spots and 'correct' a couple of things. One being the shifter shield I want to fab that up in metal since fiberglass just doesnt look right on a tractor thats 99% steel. The hood will either be repaired or replaced with an aftermarket depending on how the build goes. If I feel up to it that hood will be fabricated in metal too. Alright for the motor my 112 came with a MM100 10hp motor. I dont care for Tecumseh, so I'm gonna attempt to repower this tractor with a V-twin Briggs & Stratton 13hp motor.
Yes I know this is a bad idea. :bash: yet I feel it can be done in a matter that doesnt destroy the looks. Yes, Ive seen pics of a repower gone bad and this is just encouragement for me to do an even better job on mine. Yes I have done some research on this. Yes I know what I'm doing (sorta) and yes, these are famous last words!
So... yeah, lets get started! Also I'll update as I make some decent headway.P.S. Dear Admin let me know if my pics get out of hand on the size thing, thanks!
