Joined
·
126 Posts
I gave up on my carb. I just need to know if the carbs from the 16 hp k-series kohler are the same as for the 14 hp, thanks
Carb on a k321 Kohler
1 - 3 of 3 Posts
Joined
·
10,708 Posts
Yes but if it says Walbro don't get it. Get one that says Kohler on it. Both are model 30 Kohler carburetors. Roger
Joined
·
621 Posts
FYI, I just replaced the carb on my k341.
It previously had a Walbro on it and would not run right no matter how much you messed with the adjustments.
I bought a carb off ebay that is pretty much an aftermarket copy of the original carter carbs used by kohler. It cost $49 shipped to my door and has worked perfectly all summer. Put it on, set the idle, set the high and low speed needles and it runs perfect.
http://www.ebay.com/itm/Kohler-K341-Cast-Iron-16hp-Engine-Carburetor-/231245760397?pt=LH_DefaultDomain_0&hash=item35d752478d
It previously had a Walbro on it and would not run right no matter how much you messed with the adjustments.
I bought a carb off ebay that is pretty much an aftermarket copy of the original carter carbs used by kohler. It cost $49 shipped to my door and has worked perfectly all summer. Put it on, set the idle, set the high and low speed needles and it runs perfect.
http://www.ebay.com/itm/Kohler-K341-Cast-Iron-16hp-Engine-Carburetor-/231245760397?pt=LH_DefaultDomain_0&hash=item35d752478d
1 - 3 of 3 Posts
