[Mike48321]

How do you cozy cab people put the long rod through the small hole? Without cutting it all up.

 

[clarke212]

I am thinking about electric or hydraulic chute control. My cab doesn't have the hole, and I don't really want to make one. If I were you, I would go one of those routes.

 

[Mike48321]

Well that doesn't help at all

 

[stevenlavimoniere]

How do you cozy cab people put the long rod through the small hole? Without cutting it all up.
View attachment 286190

Well that doesn't help at all

there should be a spice coupler down at blower some did not have it on older blowers on 200 series units .. just get a black nipple and tap 2 allen keys into it and cut the rod .. this will allow you to disconnect it and slide through small hole

 

[stevenlavimoniere]

there should be a spice coupler down at blower some did not have it on older blowers on 200 series units .. just get a black nipple and tap 2 allen keys into it and cut the rod .. this will allow you to disconnect it and slide through small hole

How do you cozy cab people put the long rod through the small hole? Without cutting it all up.
View attachment 286190

this is what it should look like

 

[Mike48321]

Now to source a black nipple

 

[stevenlavimoniere]

Now to source a black nipple

Now to source a black nipple

1/4 inch black nipple x 6 cut of ends/ threads off and drill and tap .black nipples are inside diameiter

 

[Mike48321]

You just want me to do a search for black nipples.

 

[Mike48321]

Won't be the worst thing I've looked up I guess

 

[stevenlavimoniere]

Won't be the worst thing I've looked up I guess

i was just trying to help you .. sorry i did ,, dont be so negative

 

[Mike48321]

I'm just joking. That's a great tip, appreciate it 👍

 

[lt230s]

You just want me to do a search for black nipples.

🤫 That could be interesting.

 

[tmac58star]

Hmm...just don't be using that Search query/phrase on a shared computer, or in a shared space.

 

[indpndntece]

Mike, what model tractor is that cab on? I used that hole and another one i made next to it formy heat on my 322. I also have a 47qh, so i didn't need that hole for the chute control.

Hrydo upgrade will cost you $2-300, not that you are looking. Helping a friend now with his

 

[TempletonJDguy]

I just had to make a hole in my cab on the left gor my Berco. Measured and calculated 3 times and it’s still a little close to door handle but could be worse! Lol

 

[indpndntece]

Those bercos are great.

 

[TempletonJDguy]

Ya it throws amazingly well. I got this one from NYKen and it in immaculate shape. Put it on this beater 318 this winter just for fun.

 

[army]

I had turfs and chains like yours on my blower 400. They worked much better on ice than the Mudlites I have on it now. I rarely have to deal with ice though so it's not a big deal. Not gonna switch back but if I had a do-over I wouldn't bought the Mudlites and just kept using the turfs.