Weekend Freedom Machines banner

1 - 2 of 2 Posts

·
Registered
Joined
·
249 Posts
Discussion Starter #1
Hi guys. Further attempting to get my old 110 up and running, I noticed that whoever put the mid 70s Kohler 8 HP on this mower, they must not have ever changed the oil. The drain plug was completely against the frame of the mower, unable to get it to back out at all. And there is no drain underneath. So, I took the engine off the mower and cut a small notch in the frame so I could change the oil in the future, and I figured I'd put a new oil pan gasket on the engine, it's 40 years old and leaking a little. After I'd removed the sump and cleaned it out, I noticed a small piece of metal laying in the bottom, definitely something thats not supposed to be there. any idea on what this piece is? Thanks,

Dow

IMG_0512.jpg
 
1 - 2 of 2 Posts
Top