Weekend Freedom Machines banner
1 - 2 of 7 Posts

· Registered
31 Posts
Discussion Starter · #1 ·
Hi All,
I’m flushing the cooling system on a 322. What I’ve been doing is just draining the system from the pet cock on the radiator but seems like this only gets about 2/3 of the fluid out. Is there another way or better way to get everything out. I used restore and I’m worried about leaving some of it in the system and it causing corrosion. I’m also concerned that having 1/3 of the system as water will dilute the premixed anti-freeze to much.

Sent from my iPhone using Tapatalk
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.