Weekend Freedom Machines banner

Hydraulic couplers

1543 Views 9 Replies 5 Participants Last post by  hel2002002yahoocom
I'm having a hell of a time trying to replace the coupler for the angle blade. I can't find the circlip. I kind of feel it but can't see it. What's the best practical way to remove it?
1 - 1 of 10 Posts

Just wondering why your replacing the female coupler? If it is leaking while the male coupler is connected, the o-ring in the female can be replaced. Just wondering as that is easier than removing and replacing the entire coupler and a lot less expensive. Good luck, Joe S.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.