Weekend Freedom Machines banner


1467 Views 3 Replies 4 Participants Last post by  T-Mo
I'm trying to restore a 1979 model 111 J/D, serial no 105667. No electric clutch. I have run into a wiring problem and need some advice . There is a black wire running from the ignition switch and coming out of the harness, still inside console with a small lug on it. Where does it go ?
I have a J/D diagram that is not a schematic and a Clymer series book diagram that does not match.
1 - 4 of 4 Posts
Dave a 111 is a late model and you will get more and better answers in that forum. This forum is for 60s, 70s and 100s. Roger
hi all,
happy to find this site,i have a 111 1983 i think,i need some help,if anyone knows the 111 can i get some info from you,am still finding my way around this web site,found it yesterday.i need a manual i suppose thats the first thing,can anyone help.
Welcome to WFM. If you read Roger's post, you should realize this isn't the right section. This section is set up for the 60, 70, and 100 lawn tractors and the 55, 56, and 57 rear engine riders. The 111 belongs in the Late Model section, please post there, not here.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.